CNC Machinist
Job Description
Danfoss is looking for a 1st shift machinist at our Tallahassee FL location. This person will be responsible for mass-production of varying models of oil-free compressors by performing and participating in component parts preparation and line assembly operations.
Job Responsibilities
High level knowledge and training with CNC machine operations and programming
Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T).
Plans stock inventory by checking stock to determine amount available; anticipating needed stock; placing and expediting orders for stock; verifying receipt of stock.
Programs/edits mills and lathes by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs.
Sets-up mills and lathes by installing and adjusting three- and four-jaw chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers; indicating vices; tramming heads.
Loads feed mechanism by lifting stock into position.
Verifies settings by measuring positions, first-run part, and sample workpieces; adhering to international standards.
Maintains specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes.
Maintains safe operations by adhering to safety procedures and regulations.
Background & Skills
Conceptual Skills, Process Improvement, Verbal Communication, Functional and Technical Skills, Controls and Instrumentation, Supply Management, Tooling, Coordination, Inventory Control, Attention to Detail, Judgment:
Education and/or Experience
High school diploma or general education degree (GED)
Preferred
Qualifications:
Associate's Degree or Vocational Certificate in CNC Machining or Industrial Technology; and 1-2 years of experience
or; 3-5 years or equivalent experience
Danfoss - Engineering Tomorrow
At Danfoss, we are engineering solutions that allow the world to use resources in smarter ways - driving the sustainable transformation of tomorrow. No transformation has ever been started without a group of passionate, dedicated and empowered people. We believe that innovation and great results are driven by the right mix of people with diverse backgrounds, personalities, skills, and perspectives, reflecting the world in which we do business. To make sure the mix of people works, we strive to create an inclusive work environment where people of all backgrounds are treated equally, respected, and valued for who they are. It is a strong priority within Danfoss to improve the health, working environment and safety of our employees.
Following our founder's mindset 'action speaks louder than words', we set ourselves ambitious targets to protect the environment by embarking on a plan to become CO2 neutral latest by 2030.
Danfoss is an EO employer and VEVRAA Federal Contractor. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, or other protected category.
Danfoss engineers solutions that increase machine productivity, reduce emissions, lower energy consumption, and enable electrification.
Our solutions are used in such areas as refrigeration, air conditioning, heating, power conversion, motor control, industrial machinery, automotive, marine, and off- and on-highway equipment. We also provide solutions for renewable energy, such as solar and wind power, as well as district-energy infrastructure for cities.
Our innovative engineering dates back to 1933. Danfoss is family-owned, employing more than 42.000 people, serving customers in more than 100 countries through a global footprint of 95 factories.
Danfoss engineers solutions that increase machine productivity, reduce emissions, lower energy consumption, and enable electrification.
Our solutions are used in such areas as refrigeration, air conditioning, heating, power conversion, motor control, industrial machinery, automotive, marine, and off- and on-highway equipment. We also provide solutions for renewable energy, such as solar and wind power, as well as district-energy infrastructure for cities.
Our innovative engineering dates back to 1933. Danfoss is family-owned, employing more than 42.000 people, serving customers in more than 100 countries through a global footprint of 95 factories.Estimated Salary: $20 to $28 per hour based on qualifications.
Danfoss is looking for a 1st shift machinist at our Tallahassee FL location. This person will be responsible for mass-production of varying models of oil-free compressors by performing and participating in component parts preparation and line assembly operations.
Job Responsibilities
High level knowledge and training with CNC machine operations and programming
Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T).
Plans stock inventory by checking stock to determine amount available; anticipating needed stock; placing and expediting orders for stock; verifying receipt of stock.
Programs/edits mills and lathes by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs.
Sets-up mills and lathes by installing and adjusting three- and four-jaw chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers; indicating vices; tramming heads.
Loads feed mechanism by lifting stock into position.
Verifies settings by measuring positions, first-run part, and sample workpieces; adhering to international standards.
Maintains specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes.
Maintains safe operations by adhering to safety procedures and regulations.
Background & Skills
Conceptual Skills, Process Improvement, Verbal Communication, Functional and Technical Skills, Controls and Instrumentation, Supply Management, Tooling, Coordination, Inventory Control, Attention to Detail, Judgment:
Education and/or Experience
High school diploma or general education degree (GED)
Preferred
Qualifications:
Associate's Degree or Vocational Certificate in CNC Machining or Industrial Technology; and 1-2 years of experience
or; 3-5 years or equivalent experience
Danfoss - Engineering Tomorrow
At Danfoss, we are engineering solutions that allow the world to use resources in smarter ways - driving the sustainable transformation of tomorrow. No transformation has ever been started without a group of passionate, dedicated and empowered people. We believe that innovation and great results are driven by the right mix of people with diverse backgrounds, personalities, skills, and perspectives, reflecting the world in which we do business. To make sure the mix of people works, we strive to create an inclusive work environment where people of all backgrounds are treated equally, respected, and valued for who they are. It is a strong priority within Danfoss to improve the health, working environment and safety of our employees.
Following our founder's mindset 'action speaks louder than words', we set ourselves ambitious targets to protect the environment by embarking on a plan to become CO2 neutral latest by 2030.
Danfoss is an EO employer and VEVRAA Federal Contractor. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, or other protected category.
Danfoss engineers solutions that increase machine productivity, reduce emissions, lower energy consumption, and enable electrification.
Our solutions are used in such areas as refrigeration, air conditioning, heating, power conversion, motor control, industrial machinery, automotive, marine, and off- and on-highway equipment. We also provide solutions for renewable energy, such as solar and wind power, as well as district-energy infrastructure for cities.
Our innovative engineering dates back to 1933. Danfoss is family-owned, employing more than 42.000 people, serving customers in more than 100 countries through a global footprint of 95 factories.
Danfoss engineers solutions that increase machine productivity, reduce emissions, lower energy consumption, and enable electrification.
Our solutions are used in such areas as refrigeration, air conditioning, heating, power conversion, motor control, industrial machinery, automotive, marine, and off- and on-highway equipment. We also provide solutions for renewable energy, such as solar and wind power, as well as district-energy infrastructure for cities.
Our innovative engineering dates back to 1933. Danfoss is family-owned, employing more than 42.000 people, serving customers in more than 100 countries through a global footprint of 95 factories.Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
